Kitchen and bathroom Silicone glue Features

One part, can be easily used and extruded with common caulking guns. *Neutral cure, suitable for use on most construction materials. *Excellent mechanical properties. *Outstanding weatherproofing ability, resisting to ultraviolet ray (UV), ozone, snow or temperature extremes. *Neutral cure, non-acidic, will not corrode metal or other corrosion-sensitive material.

 

Loyal Kitchen and bathroom Silicone glue

Component

One Component

Color

Any

Shelf life

12 Month

OEM

Accept

Sample

Accept

8/14

LOYAL weatherproof neutral silicone sealant is a one-part, neutral and moisture cure, medium modulus silicone sealant that provides durable, pliable, watertight joints and offers outstanding adhesion without priming to most non-porous substrates.

Withits unique weather-resistant formula, it possesses a balanced adhesive strength and very high recovery, making it ideal to withstand adverse weather conditions in common installations including moisture, movement, sheer, and de-flection, heat and cold resistant, aging resistant, UV resistant . It is easily gunnable in all weather conditions from -20 to 120 degrees F.

 

Because our weatherproofing silicone caulking requires no mixing and a smaller joint ratio, it is an economical, high-performance alternative to other comparable sealants with a ±40 percent movement capability.

Loyal Kitchen and bathroom Silicone glue

1

Appearance

Smooth paste without bubble or particles

2

Available Color

Clear;White;Black; and other special color

3

Specific Gravity

1.42 to 1.55g/ml

5

Skin Time

20-60 Mins

6

Full Cure Time

24-72 hours (6mm thickness)

7

Tensile Strength

≥1.0Mpa

8

Elongation at break

≥450

9

Hardness Shore A

>28

10

Working Temperature

-40 to 280℃

11

Extrusion Rate

200-400g/min

12

Shelf Life

≥12 months (shore below 32℃)

How to use Kitchen and bathroom Silicone glue

1. Make sure surfaces clean and dry. Remove any soap, oil and grease.

2. Cut tip off cartridge, screw on nozzle. Cut nozzle to desired opening at 45 angle.

3. For a smooth seal hold at 45 angle and apply silicone sealant ahead of nozzle.

4. If further caulking is required, complete within 5 mins, remove excess sealant immediately with dry paper.

Kitchen and bathroom Silicone glue Directions:

Must use a solvent such as toluene or acetone,at the interface clean and keep dry.Construction of application of sealant to completely fill the joints to ensure that both sides of bonding.They needs to protect the side labeled tape,but not touch the tape will be the construction surface.The plastic is not cured prior to trimming immediately in order to achieve a beautiful look