One part, can be easily used and extruded with common caulking guns. *Neutral cure, suitable for use on most construction materials. *Excellent mechanical properties. *Outstanding weatherproofing ability, resisting to ultraviolet ray (UV), ozone, snow or temperature extremes. *Neutral cure, non-acidic, will not corrode metal or other corrosion-sensitive material.

LOYAL weatherproof neutral silicone sealant is a one-part, neutral and moisture cure, medium modulus silicone sealant that provides durable, pliable, watertight joints and offers outstanding adhesion without priming to most non-porous substrates.

Withits unique weather-resistant formula, it possesses a balanced adhesive strength and very high recovery, making it ideal to withstand adverse weather conditions in common installations including moisture, movement, sheer, and de-flection, heat and cold resistant, aging resistant, UV resistant . It is easily gunnable in all weather conditions from -20 to 120 degrees F.

Because our weatherproofing silicone caulking requires no mixing and a smaller joint ratio, it is an economical, high-performance alternative to other comparable sealants with a ±40 percent movement capability.

1. Make sure surfaces clean and dry. Remove any soap, oil and grease.

2. Cut tip off cartridge, screw on nozzle. Cut nozzle to desired opening at 45 angle.

3. For a smooth seal hold at 45 angle and apply silicone sealant ahead of nozzle.

4. If further caulking is required, complete within 5 mins, remove excess sealant immediately with dry paper.

Must use a solvent such as toluene or acetone,at the interface clean and keep dry.Construction of application of sealant to completely fill the joints to ensure that both sides of bonding.They needs to protect the side labeled tape,but not touch the tape will be the construction surface.The plastic is not cured prior to trimming immediately in order to achieve a beautiful look